OMAHA, Neb  (USACE)  –The U.S. Army Corps of Engineers-Omaha District increased releases from Jamestown Dam, North Dakota, Wednesday to 500 cubic feet per second.Meanwhile, Pipestem Dam(Stutsman County, North Dakota)releases have begun to slowly drop this week as lake levels near the target elevation of 1442.5 ft.

As of the Friday news release,  Pipestem releases were near 50 cfs. Once Pipestem Dam releases dropped below 100 cfs,releases were increased from Jamestown Dam to lessen the risk of ice-related flooding downstream.

Combined releases from Jamestown and Pipestem Dams are now 550cfs. Updated reservoir forecasts for Jamestown Dam now indicate the reservoir pool will reach the target elevation of 1429.8 ft by March 1.Pipestem pool elevation will continue to slowly drop until reservoir inflows balance with outflows, likely sometime in the next week.

The Corps of Engineers will continue to operate to minimize the risk of ice-related flooding, and adjust releases as needed.Jamestown Dam pool elevation is 1432.4ft, approximately 2% into the flood pool, and is dropping. The pool elevation peaked on November 12, 2019at 1442.0 ft, which was 31% into the flood pool. Inflows are near 125cfs, and releases are 500cfs. Pipestem Dam pool elevation is 1443.2ft, less than 1% into the flood pool, and is dropping. The pool elevation peaked on October 29, 2019,at 1475.0 ft, which was 43% into the flood pool. Inflows are near 10cfs, and releases are 50cfs.The Corps of Engineers is coordinating with relevant agencies in North and South Dakota.